Robot xử lý Handling NACHI-FUJIKOSHI ES06/ES12

 Payload

 Maximum reach (input the rst two digits): 550, 450, 350mm

 Vertical stroke (shows rst two digits): 200, 340mm

 Version

 Payload

 Maximum reach (input the rst two digits): 550, 700, 850mm

 Vertical stroke (shows rst two digits): 350, 450mm

 Version

( * ) Explosion-proof is not available.

(*1) Note that maximum allowable moment of inertia varies according to load conditions on the wrist.

(*2) Permitted height is not higher than 1,000m above sea level. If used in higher place, permitted temperature is affected by height.

(*3) Fluids that cause the deterioration of sealants, such as gasoline-based cutting uids, chlorine, alkali, acids, and organic solvents, cannot be used.

(*4) The maximum velocity in the chart is a maximum value. The maximum value may change depending on work programs and load conditions of the wrist.

(*5) Secondary Ø4 piping is possible with solenoid valve (option).

(*6) Possible to use 8 lines for LAN wiring as spare wires, too.

(*7) Downward pressing force that is possible on tip of load when maximum load is mounted, and axis 1, axis 2, and axis 4 are static. Use at values below those noted here.
Also, an overload error occurs if pressure is applied for a long period of time. Use under conditions in which errors do not occur.